מייבש לחות תקרתי- LUKO FD-S500L

מייבש לחות תקרתי- LUKO FD-S500L Ducted

This series is normally with low regeneration temperature.It is suitable for environment with surplus of heat, and it is usually apply in application that require to achieve low dew point.

• • • FD-S series is the company's self-developed recirculated air dehumidification system. The system will first capture the indoor air to pass through the first stage (G4 efficiency) and second stage (F7 efficiency) air filtration in order to remove air borne particles and contaminants. The partial filtered air will then enter into the direct expansion dehumidification system to remove the excess moisture. The excess moisture in the air will be condensate and turn into water. The water will then be collected at a drain pan, where it will
  be pushed out with the help of positive air pressure from the processed air. The dried air will then pass through the final stage of HEPA filter to remove micron size particles and airborne bacteria. The final output air will be cleaned and dried. The same process will continue to work until the ambient air reach to the set-point of the desire humidity level.
•  
• This system is suitable for area that are enclose and not require to introduce fresh air, for example like warehouse, storage and equipment room that require to keep the room constantly dry at all times.

• With LUKO FD-S system, the recirculated air dehumidification system would help to constantly keep the treated room dry without loss of energy, as the dry air is contain within the room. Hence, this would help to constantly maintain the humidity level

without affecting the stored goods or production process that are highly sensitive to moisture.

KEY FEATURES

• The body material is made of cold-rolled sheet metal with epoxy powder coating

• A mini measuring level sticked on the bottom side of the unit, which can help to keep the balance during installation

• An electric heater can be mounted in the air outlet duct for further heating of the dry air

• Built-in Centralized Fresh Air Fan with self-balancing function to exhaust excessive moisture from the indoor ambient air

• Condensate trap does not need to install because of the positive pressure drainage design. This helps to save more space during installation.

• Evaporator and Condenser is epoxy-coated for better durability and corrosion resistant. It is also washable for maintenance service.

• The machine is built for 24/7 operation with automatic dehumidification and positive pressure drainage

• Low Noise, High Static Pressure, Double Speed Centrifugal Fan, which allow fan speed adjustment.

Blue hydrophilic-coated  aluminum-fin  heat exchanger coils and SS304 condensate drain pan is made of  prevent corrosion damage

• Purifying spare parts replacement is mandatory, which can better improve the air quality and the machine’s service life.

• Air Purifying section can be integrated freely into the system (Medium Efficiency Filter, HEPA Filter, Activated Carbon Filter, UV Sterilizing Lamp and Negative Ionizer).

• The machine uses name-brand compressor Daikin,with eco-friendly R410A or R134A refrigerant.

• The hinged side panel design ensure easy access to the internals for the maintenance.

• The machine can be connected and monitored with RS485 serial port and Wi-Fi App.

• Touch screen controller (integrated with temperature & humidity sensor) simplifies complex wiring and installation.